User's Manual Part 2

52
52
The GS820 System
The GS820 System
8) Extended boom length tolerance
9) Radius tolerance
10) Boom angle tolerance
4E) MEMORY BANKS
1) Save config. A (Copy configuration to
memory bank A)
2) Save config. B (Copy configuration to
memory bank B)
3) Save config. C (Copy configuration to
memory bank C)
4) Get config. A (Copy memory bank A to
current configuration)
5) Get config. B (Copy memory bank B to
current configuration)
6) Get config. C (Copy memory bank C to
current configuration)
7) Restore default (Restore factory
configuration)
8) Clear configuration
4F) DATA LOGGER
1) Data logger mode
2) Adjust date
3) Adjust time
4G) LOCKOUT SETTINGS
1) Warning level
2) Alarm level
3) Lockout level
4) White wire lockout trigger
5) Green wire lockout trigger
6) Orange wire lockout trigger
7) Blue wire lockout trigger
8) Lockout relay inverted
4H) PASSWORD SETTINGS
1) Administrator password
2) User password
3) Tare menu password protection
4) Limit menu password protection
5) Info menu password protection
6) System start-up password protection
7) Parts of Line menu password protection
8) Chart Rigging password protection
9) Display Settings password protection
10) Sensor List password protection
11) Sensor Calibration password protection
12) Radius Settings password protection
13) Chart Settings password protection
14) Memory Banks password protection
15) Data logger password protection
16) Lockout Settings password protection
17) Network Options password protection
18) System Diagnostic password protection
19) Alarm Bypassed protection
4I) NETWORK OPTIONS
4I1) NETWORK CONTROL
4I2) REPEATER LIST
4I3) SET UP SENSOR REPEATER
4I4) INSTALL SENSOR UPDATE
5) SYSTEM DIAGNOSTIC
5A) SYSTEM SENSORS DIAGNOSTIC
5B) RADIO NETWORK DIAGNOSTIC
5B1) RADIO NETWORK
5B2) LAST SENSORS RECEIVED
5B3) SEARCH FOR SENSORS
5B4) BIT ERROR RATE TEST
5C) LOCKOUT DIAGNOSTIC
5D) DISPLAY DIAGNOSTIC
1) Time
2) date
3) Time clock battery test
4) External power supply voltage
5) Internal temperature
6) GS820 base station identification number
7) GS820 (portable) battery level
8) Radio certification
9) Radio frequency
5E) DIGITAL INPUT DIAGNOSTIC
6) SYSTEM LIMITS
7) TARE
8) INFORMATION
1. Software package
2. Firmware
3. Language pack
4. graphic library
5. capacity chart
6. sensor update pkg
7. bios
8. usb driver