User's Manual

The GS320 System

1.1 Overview

The wind speed indicator kit includes a GS320

display and a wind speed sensor. The GS320

creates a two-way radio network with the wind

speed sensor to bring live readings on screen. The

GS320 has a user adjustable maximum wind

speed limit and will generate an alarm when this

limit is reached. Furthermore, when in alarm

voltage is generated on the green wire; this can be

used to activate a remote siren, light or lockout

function.

1.2 Start-Up

On power up, the display will show two horizontal

lines and the green status light will flash.

Once a reliable radio communication network is

established, the display lights will remain lit without

flashing.

If the status light flashes continuously for more than

30 seconds the GS320 may not be correctly

programmed for the wind speed sensor. To

correctly program the GS320 for the wind speed

sensor follow the Wind speed ID number

procedure in the Operation section of this manual.

1.3

Recommended Operating

Conditions

Supply voltage:

9 to 30 volts

Current requirements:

maximum 1 amperes

Output wire voltage:

0 volts or supply voltage - 0.7 volts

Output wire current capability:

0.75 amperes

Operating temperature:

-40°C to +85°C (-40°F to 185°F)

INTRODUCTION