User's Manual Part 2

GS550 UNDERHOOK
16
ChApTEr 5: uSB TOOL
5.2a Installation on a PC
Install the USB Key in a USB port.
1. Click Start.
2. Click My Computer.
3. Double-click on the USB drive.
4. Double-click on setup.exe.
5. Complete the installation as instructed on the
computer screen.
5.2b Quick Start
1. Start the data logger viewer application.
2. Open the log file (see section 4.1b). Only .dtl
files generated by the GS550 data logger can
be displayed.
5.2c Full Report
1. Start the data logger viewer application.
2. Open the log file (see section 4.1b). Only .dtl
files generated by the GS550 data logger can
be displayed.
Table: Full report column headings
column descRIptIon
Event Record trigger*
Date Event date stamp.
Time Event time stamp.
System Units Length units (metric or US)
and weight units at the time
of the event.
Battery Voltage Display power supply voltage
at the time of the event.
column descRIptIon
Event Record trigger*
Date Event date stamp.
Time Event time stamp.
System Units Length units (metric or US)
and weight units at the time
of the event.
Battery Voltage Display power supply voltage
at the time of the event.
Temperature Internal temperature of the
GS550 Underhook display.
Firm. Version Display firmware version at
the time of the event.
Sensor # 1 Sensor type: the sensor
number corresponds to the
sensor list programmed into
the GS550 Underhook.
* Examples: Crane start-up, sensor alarm. The
beginning and end of sensor alarms are indicated
as “in” and “out”: examples: “overload in”,
“overload out”.