User's Manual Part 1

GS550 UNDERHOOK
14
ChApTEr 4: SETup
4.6 System Diagnostic
Diagnose system issues with the sub menus of
menu 5) System Diagnostic.
4.6a System Sensors Diagnostic
1. Go to menu 5A1).
2. Use Back and Next to select the sensor.
3. Press Enter to see sensor data.
4. Press Enter to get the sensor firmware product
and version numbers.
5. Press Exit five times to return to the main
operation display.
4.6b Display Diagnostic
1. Go to menu 5D1) Time and Date. The page
shows the current time and date according to
the GS550 internal clock.
2. Press Next to go to menu 5D2) Time clock
battery. Self-test pass or fail.
3. Press Next to go to menu 5D3) External
power voltage.
4. Press Next to go to menu 5D4) Display
internal temperature.
5. Press Next to go to menu 5D5) GS550 base
station ID. The base station ID should be
the same as the GS550 display serial number
printed on the top of the enclosure.
6. Press Next to go to menu 5D6) Battery level.
The battery level of the onboard rechargeable
battery pack is indicated.
7. Press Next to go to menu 5D7) Radio.
“FCC”, “IC” indicates Federal Communications
Commission (U.S.A.) and Industry Canada
certification, “CE” indicates European
Community certification. The frequency used by
the network is indicated on the second line.
8. Press Exit three times to return to the main
operation display.