Product Manual

10 3
REAR BRACKET
FRONT STRAP & BUCKLE
SHAFT COLLARS
ROLLER
SPRAY LUBE HERE
DRAGSHEET
DRIVE SLOT
LOGO (ON INBOARD FACE)
BEARING BRACKET
3/8" WASHER
3/8" x 1 1/2" BOLT
3/8" WASHER
3/8" NUT
WARNING ON OUTBOARD FACE
REAR STRAP
PLASTIC END CAP
BUMPER TIE DOWN
(DRIVER'S SIDE ONLY)
HANDLE ASSEMBLY
CRANK BAR
PASSENGER'S SIDE
TO FRONT OF TRUCK
DRIVER'S SIDE
FOR TECHNICAL ASSISTANCE
CALL 1-800-580-0791
Do not allow grass clippings or
other organic materials to stay in
your truck for more than 24 hours.
They may "knit" together and be
difficult to get it out.
If you are moving loads which
"lock up" like scrap roof shingles,
do not allow any of the load in
front of the wheel wells. This will
lock the whole load.
It is much easier to clean out any residue from
the truck if you remove the unit from the
tailgate first.
Always wash the dragsheet off with a hose at
the end of the day. This will prevent sticky build
up and keep the dragsheet slick.
DON'T FORGET THE CRANK HANDLE.
Always keep it in the cab. If you leave it on the
truck bed, or on the ground, it can get covered
by loose material or long grass.