Product Manual

6
TO STOP ROLLER TURNING WHILE
DRIVING WITH A LOAD
IF YOUR LOAD DOESN'T MOVE, STOP!
Check to see if the load is "LOCKED" around the wheel
wells. Call a product specialist at [phone] for
assistance if desired.
1. Press the Velcro straps together to make one long strap.
2. Feed one end of this long strap through the drive slot.
3. Wrap the strap around the bearing bracket projecting from
 the rear of the tailgate.
4. Pull the strap and tight press the ends of the strap together
 to secure them in place.
 This will keep the roller from turning while you are driving
 with a high load and stop the dragsheet from billowing
 behind the truck.
 It is also a good place to keep the straps when you are
 loaded. You'll know where they are!