Instructions / Assembly

Page: - 2 - / 3
PARTS TYPE & QTY INCLUDING:
(A) Mounting plate (1)
(B)Green ground screw (1)
(E) Back plate (1)
(F) Ball knob (2)
(G) Lid (1)
(H) Glass shade (1)
ACCESSORIES & QTY ENCLOSED:
(C)Plastic wire connector (3)
(D) Mounting screw (2)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and
accessories are included as shown in the above illustration
2. Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the electricity until the work is done.
A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the “OFF” position. B). Place
the wall switch in the “OFF”position.
3. Carefully thread glass (H) onto the lid (G) till tight.
4. Unscrew the ball knobs（F）from the back plate(E) then carefully
remove the mounting plate (A)
5. Install bulb (Not included. Please do not exceed the maximum
capacity recommended on the socket.)
[e-mail]