Manualshelf

Instructions / Assembly

ManualsBrandsLNC ManualsFlush Mount Ceiling LightsModern Plating Brass Integrated LED Flush Mount with Clear Acrylic Shade with Ripple Edge 12.8 in. 1-Light Ceiling Light
1234
Page: - 2 - / 4
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are
included as shown in the above illustration.
PARTS TYPE & QTY INCLUDING:
(C) Single bar (1)
(D) Green ground screw (1)
(E) Canopy (1)
(F) Body (1)
(G) Cap nut (1)
ACCESSORIES & QTY ENCLOSED:
(A) Plastic wire connector (3)
(B) Mounting screw (2)
2. Turn off power
Before you start the installation, NEVER attempt any work without shutting off the electricity
until the work is done.
»
Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position.
»
Place the wall switch in the “OFF” position.