Instructions / Assembly

[e-mail]
Page: -
2
- / 4
PARTS TYPE & QTY INCLUDING:
(A) Mounting plate (1)
(B) Green ground screw (1)
(C) Back plate (1)
(D) Stud (3)
(E) Joint (3)
(F) Arm (2)
(G) Socket (1)
(H) Shade base (1)
(I) Shade (1)
(J) Screw (3)
(K) Ball nut (2)
ACCESSORIES & QTY ENCLOSED:
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are
included as shown in the above illustration .
2. Make fixtue assembly
1) Carefully and gently pull the wires and fiberglass sleeve from the
another end of arm(F) ,meanwhile push the socket (G)till two parts
of joint are close each other , lay wires in the cave of joint(E), then
proceed to push till the two parts are put together, secure
with the stud.
Do the same to the middle joint and base joint to finish the arms
assembled.
2) Make wire connections