Instructions / Assembly

Page: - 1 - / 4
Item Number: A03475
WARNING (To reduce the risk of fire, electric shock, or injury to persons):
1. We suggest installation by a licensed electrician.
2. Please read the instruction carefully and save it as you may need it at later time.
3. Before you start, NEVER attempt any work without shutting off the electricity until the work is
done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch
in the “OFF” position. B). Place the wall switch in the “OFF” position.
4. Mounting surface should be clean, dry, flat, strong enough and 1/4” larger than the canopy on all
side. Any gaps between the mounting surface and canopy exceeding 3/16” should be corrected
as required.
5. Make sure that the ceiling or wall can stand the weight of the lamp before fixture.
6. Make sure the voltage you are using is 120V. The maximum wattage is 60W per bulb.
7. Keep the lamp away from acidic and basic objects in case of damaging the surface of the lamp.
8. When replacing bulb, you should turn off or unplug the lamp and you must wait until it is cool
as bulbs get hot quickly.
9. The safety instructions appearing in this manual are not meant to cover all possible conditions
that may occur. It must be understood that common sense, caution and care must be used with
any electrical products.
IMAGE FOR FINISHED PRODUCT：
[e-mail]