Installation Guide

[phone] Working hours : Mon - Fri 9:00 a.m. - 16:00 p.m. EST [e-mail]
www.ihomeangel.com Page: - 2 - / 3
PARTS TYPE & QTY INCLUDING:
(A) Mounting plate assembly (1)
(B) Green ground screw (1)
(E) Back plate (1)
(F) Threaded ball (2)
(G) Socket cap (1)
(H) Metal shade (1)
(I) Socket ring (1)
ACCESSORIES & QTY ENCLOSED:
(C) Mounting screw (2)
(D) Plastic Wire Connectors (3)
ASSEMBLY & INSTALLATION INSTRUCTIONS:
1. Carefully remove the fixture from the carton and check that all parts and accessories are included as shown in
the above illustration .
2. Turn off power
Before you start to make installation, NEVER attempt any work without shutting off the
electricity until the work is done. A). Go to the main fuse, or circuit breaker, box in your home.
Place the main power switch in the “OFF” position. B). Place the wall switch in the
“OFF”position.
3. Unscrew the socket ring (I )from the socket ,then place metal shade (H)
over the socket ,secure with the socket ring( I)
4. Unscrew the threaded balls (F) from the back plate (E)
then carefully remove the mounting plate assembly (A).
5. Attach the mounting plate assembly(A) to outlet box with
mounting screws (C).
Carefully and gently pass the outlet box wires through
the mounting plate assembly(A).