user manual

Mint v4 PC Programming Guide
22
MN1278 05.2001
12. Select ‘ClassView’. Right click on ‘CVCTutorialDlg’ and select ‘Add Member Variable’. Copy the dialog
below.
Figure 3-11: ClassView Dialog (step 12)
13. Find CVCTutorialDlg::OnInitDialog() in the file ‘VCTutorialDlg’. Replace the comment ‘// TODO: Add
extra initialization here’ with code to initialise the CController * object. This will depend on the controller
being used Note that m_pController could have been declared as the class that will be created (e.g.
CMintDrive) in which case <dynamic_cast> would not have to be used.. The #define values should be
modified to reflect the system being used.
MintDrive
#define NODE 10
#define COMMPORT 1
#define BAUDRATE 57600
m_pController = dynamic_cast<CController *> ( new CMintDrive ( NODE, COMMPORT, BAUDRATE,
TRUE ));
NextMove PC
#define NODE 0
#define ADDRESS 0x23C
m_pController = dynamic_cast<CController *> ( new CNextMovePC ( NODE, ADDRESS ));
NextMove PCI
#define NODE 0
#define CARDNUMBER 0
m_pController = dynamic_cast<CController *> ( new CNextMovePCI1 ( NODE, CARDNUMBER ));
NextMove BX
#define NODE 1
#define COMMPORT 2
#define BAUDRATE 9600
m_pController = dynamic_cast<CController *> ( new CNextMoveBX ( NODE, COMMPORT, BAUDRATE,
TRUE ));