BW08
1. Charging The Bluetooth bracelet comes with a built in rechargeable battery. Before using the bracelet for the first time please charge the battery fully (Approximately 6 hour charge). 1.1 How to Charge To charge the bracelet please plug the appropriate end in to the bracelet charge port on the bracelet and the USB end either into a computer or the wall adapter provided. 1.2 Normal Charging Time The bracelet will normally take 2 hours charge from completely flat.
When the battery is running low the screen will show “Low Battery”. When this occurs please charge the bracelet to ensure greater battery life. 2. Turning the Bracelet OFF/ON To turn the bracelet on hold down the main button for 2 seconds until the screen show “power on”, and will enter the connecting status directly and show “connecting” on the screen. To turn the bracelet off hold the main button down until the screen show “power off”. 3.
call, press the button one second to reject a call and the screen will show “ Call rejected”. 5. Link loss The screen will first show “ Link Loss” and then show “No connect” and vibrate once the link have been cut. 6. Linking Bracelet with phone When the bracelet is turned back on, depending on your phone it should re-link automatically To re-link the bracelet with the phone manually go to the Bluetooth menu on your phone select the bracelet in this list and choose the connect with device option.
· Do not use abrasive cleaning solvents to clean the bracelet · Do not expose the bracelet to extreme temperatures high or low. · Do not stick anything on the inside of the bracelet as this may damage or stop the bracelet from working · Store bracelet in a safe dry place away from extreme temperatures and dust · Do not attempt to replace the bracelet's battery yourself · Only used the charge cable hat came with the bracelet · Do not use the charger outdoors Product Specification Bluetooth Version 1.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for and radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
