User's Manual

5. Linkbraceletwithphone
 Oncepairingissuccessful,thebraceletisinstand-by
mode.
1. Press“poweron/o”buonandthebraceletwill
 beconnectedtophoneandpress“Yes”onthephone
 toacceptreconnectmode.
2. OperatephonemanualtoenableBluetoothfuncon
 andthengoingintoprogramofpaireddeviceand
 select“bracelet”
6. UsingtheBracelet
 Whenacalliscominginthebraceletwillvibrateanda
 redLEDwilllight.Somebrandsofmobilephoneswill
 acvatethevibratefeatureoftheBraceltandared
 LEDwillashwhenaSMSisreceived
 TheBraceletwillvibrateandaredLEDashwhenthe
 distanceismorethan10mbetweenthemobilephone
and bracelet.
7. ToresettheBracelet
 Youmaywanttoresetthebracelettooriginalseng.
 Thisalsoclearsallcurrentsengs.
1. Assure the bracelet is OFF.
2. Constantlypress“poweron/o”buonunlLED
 blinksredandgreencolour.
3. Releasethe“poweron/o”buon.
4. Hold“poweron/o”buon4seconds.