User's Manual

3 Turnon/obracelet
3.1 Turn on the bracelet
 Pressandhold“poweron/o”buonfor2seconds
 unlthegreenLEDashesquickly.
3.2 Turnothebracelet
 Pressandhold“poweron/o”buonfor4seconds
 unltheLEDashesquickly.
4.1 Pairingbraceletwithphone
 ThisbraceletistobeusedwithBluetoothenabled
 mobilephone.Sengupasbelow:
• Keepbraceletandphonewithin1meterapart
• Makesurethebraceletisturnedo
• Holdthe“poweron/o”buonfor4secondsunlthe
 greenandblueLEDashalternavely.
• IniateBluetoothfuncononyourmobilephone,and
 thensearchforBluetoothdevices.Ifitissuccessful,
 themobilephonewillshowthenameofBluetooth
 device“bracelet”.
• Press“yes”topairthisbraceletwithphone.
• InputIDcodeofbracelet“0000”,Press“Yes”to
 completepairing,thengreenLEDwillash5mes,
so that bracelet is under stand-by mode and ready for
 Bluetoothcommunicaon.Presslocatethisbracelet
 within10meters(max.)tophones.
Noce:Ifpairingprocesscan’tbecompletedwithin2minutes,
theredLEDwillashandthebraceletwillturnoautomacally.