User's Manual

2 ChargingtheBracelet
2.1 Plugthesmalladaptorintothebraceletandthenturn
 ontheACmainsatthewall.
2.2 Chargingme
 Normally,thebraceletbaerywillbefullycharged
 aerabout2hours.Whenthebaeryisfullthe
 braceletwillstopchargeautomacally.
 Then,holdthe“poweron/o”buonfor2secondsto
 turnonthebracelet.(Pleaserefertothepicturefor
 thebuon
2.3. Charging indicator
When the bracelet is charged, red LED light on. Once
 thebaeryisfull,thentheLEDwillturno
 automacally.
2.4 Standby Time
 Whenthebaeryisfullthestandbymeis100hours.
2.5 LowBaery
 whenthebraceletisonandthebaerybecomeslow,
 theredLEDwillblinkevery1minute.Atthatme,
 pleaserechargethebaeryaspertheabovesteps.