)../6!4)6% 4%#(.
1. Getting Started Welcome to the LM Technologies Bluetooth Bracelet. Please read this manual carefully before using this bracelet. • Important: Please charge the Bluetooth Bracelet for 6 hours before using it the first time. • It notifies you when your phone rings with a discreet vibrating sensation. • The Bluetooth Bracelet will also alert you when you mobile is more than 5 Meters away from you.
2 Charging the Bracelet 2.1 Plug the small adaptor into the bracelet and then turn on the AC mains at the wall. 2.2 Charging time Normally, the bracelet battery will be fully charged after about 2 hours. When the battery is full the bracelet will stop charge automatically. Then, hold the “power on/off” button for 2 seconds to turn on the bracelet. (Please refer to the picture for the button 2.3. Charging indicator When the bracelet is charged, red LED light on.
3 Turn on/off bracelet 3.1 Turn on the bracelet Press and hold “power on /off” button for 2 seconds until the green LED flashes quickly. 3.2 Turn off the bracelet Press and hold “power on /off” button for 4 seconds until the LED flashes quickly. 4.1 Pairing bracelet with phone This bracelet is to be used with Bluetooth enabled mobile phone.
. Link bracelet with phone Once pairing is successful, the bracelet is in stand-by mode. 1. Press “power on / off” button and the bracelet will be connected to phone and press “Yes” on the phone to accept reconnect mode. 2. Operate phone manual to enable Bluetooth function and then going into program of paired device and select“bracelet ” 6. Using the Bracelet When a call is coming in the bracelet will vibrate and a red LED will light.
5. 6. Recharge power to the bracelet for a few seconds. The bracelet will turn off and returns to the original setting mode. All of previous pairing data are cleared. 8 Warning 8.1 • Bracelet Please turn off the bracelet before putting it on your wrist. Do not expose the bracelet to liquid, moisture or humidity as is not waterproof. Do not use abrasive cleaning solvents to clean the bracelet. Do not expose the bracelet under high or low temperatures.
5. Technical specification: Bluetooth V1.2 Class2 standard (10M) Availability distance 5-10M Automatic battery power saving Safety attention, data encrypt 10 days active battery life 120-240V AC adapter with 5V DC Output One (1) Year International warranty Your LM Technologies bracelet is warranted by your supplier for a period of one (1) year from the original data of purchase under the terms and conditions of this warranty.
In case of replacement, LM Technologies cannot guarantee that you will receive the same model bracelet. If your model is not available, a bracelet of equal value and similar style will be provided. The warranty for the replacement bracelet ends one (1) year from the data the replacement bracelet is received. THIS WARRANTY DOES NOT COVER •Any defects in materials and workmanship of battery, case, crystal, strap or bracelet.
LM Technologies entire liability shall be limited to replacement or repair of the purchase price paid, at LM Technologies soles option. Some countries, states, or provinces do not allow the exclusion or limitation of implied warranties or the limitation of incidental or consequential damages so the above limitations and exclusions may be limited to their application to you. When implied warranties may not be excluded in their entirety, they will be limited to the applicable written warranty.
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for and radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
Copyright © LM Technologies Ltd - 2007
