User's Manual

LM505 Page 2 of 3
[phone] | www.lm-technologies.com | [e-mail]
3 Packaging Options
4 General Specification
Product: LM505
Part No: 505-0511
Datasheet Rev 1.0/25-07-12
1x Bluetooth USB Adapter
AO - Adapter Only
Part No 505-0511
Specificaon
Descripon
Product Name LM505 Bluetooth USB Nano Adapter
Chipset Broadcom BCM2046
Bluetooth Standard
Bluetooth v2.1 + EDR
Frequency Band 2.4 - 2.4835 GHz ISM Band
Modulaon Method
GFSK for 1 Mbps, π/4-DQPSK for 2 Mbps, 8-DPSK for 3 Mbps
Spread Spectrum
FHSS (Frequency Hopping Spread Spectrum)
Transfer Rate (Max)
3 Mbps enhanced data rate
RF Output Power
Class 2
Working Distance 10 m - 25 m in open space
Rx Sensivity
-80 dBm at 0.1 % BER
Input Voltage DC 5V (via USB port)
I/O Interface
USB 2.0
LED indicator
Power/Acve
OS Support
Win XP/VISTA/7
Size 23(L) x 19(W) x 8(H) mm
Soware/Drivers Windows XP/VISTA/7, Widcomm
Bluetooth Profiles GAP,SPP,HSP, HFP, DUN, FTP, FAX, PAN, LAN, HID, SYNC, HCRP, A2DP, AVRCP,
BIP, GOEP, SDAP, OPP
5 FCC Regulation Statement
This device complies with Part 15 and 15B of the FCC Rules. Operaon is subject to the following two condions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause undesired operaon
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protecon against harmful interference in a residenal installaon.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instrucons, may cause harmful interference to radio communicaons. However, there is no guarantee that interference will
not occur in a parcular installaon. If this equipment does cause harmful interference to radio or television recepon, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Installaon and use of this device must be in strict accordance with the instrucons included in the user documentaon provided
with the product. Any changes or modificaons (including the antennas) made to this device that are not expressly approved by the
manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or