User's Manual

Using the reader

Remove the articles from the reader when it prompts you to do so. Once this is done, log out by pressing the

“Log out” icon located on the upper right corner.

5.3. Technical references

Technical reference can be used to link scanned activity to external system e.g. patient health system or detailed

autoclaving result logs.

Select the activity and scan. Press (+) icon on the reader’s screen.

Scan external ex. barcode or QR code with barcode/qr-code reader. Press green icon to conﬁrm technical

reference.

Note:Note: capital letters are not allowed with the technical references but special characters are.

Press send. Technical reference information can be found from the log view.