User's Manual

Using the reader
22
5. USING THE READER
5.1. First time use
The device is started by connecting the power cable, see the chapter “Power and ethernet”. Before connecting,
check that the cable and power source are intact.
When using the reader for first time the following warning message will appear to the reader screen:
Press the green icon to acknowledge the warning.
The following display will appear to reader screen:
Define the activities to the reader from the server. You can define up to six activities for the reader. To define
activities, please see the Server user manual for detailed instructions.
5.2. Normal use
Log in using a PIN code, using an RFID card, using a PIN code and an RFID card or using a PIN code or an
RFID card, depending on the selected login policy.
If RFID is selected as the only login policy, you will only be able to log in using a card. Log in to the system by
placing the card on the reader. If the id card does not support the UHF System, then external readers that are
USB HID compatible can also be used for login.