User's Manual

Installation of the reader

4.2. Power and ethernet

• Verify that the voltage rating shown on the base of the reader matches the voltage of the AC power

outlet.

• Verify that the AC power outlet is provided with the protective ground.

• Connect the DTS Reader to AC power (110 V / 230 V) via the power cable or the Power over Ethernet

(PoE) cable (PoE only available in LM DTS

Tray reader, not supported in Prod Code 70010).

• After connecting the power check that the touch screen is turned on (Might take up to 30 s).

• The device starts and establishes a connection with the network automatically.

AC power ports

Ethernet cable

port

Tray reader

Unit reader