Manual

Automatgevär m/42 B Manual
2000 Anders & Petter.
8
4. Sights
The sight has two range tags, one for spitzer (torped) ammunition and one for round nose (ogival).Which one
is installed can be seen between the sight screw and the range window. The bullet image (spitzer or round
nose bullet) should match the ammunition used. With the sight screw the sight can be adjusted for every 100
m. From 100 to 700 m with spitzer ammunition, or 100 to 600 m with round nose.
The range tags are changed as follows;
Push in the lower barrel band spring to release the band.
Pull the barrel band forward. If needed, lightly tap the band.
Lift the forward part of the hand guard and remove it.
Remove the sight screw and the range tag inside it.
Insert the proper range tag.
Reinstall the parts in reverse order.