Manual

Automatgevär m/42 B Manual

2000 Anders & Petter.

• Mynningsbroms – Muzzle brake

• Ståndmärke med ritsa – Front sight alignment mark

• Kornskruv – Front sight screw

• Korn – Front sight

• Kornhållare – Front sight carrier

• Mynningspropp – Muzzle plug

• Kornklack – Front sight base

• Läskstång – Cleaning rod

Removal of firing pin;

Push out the retaining pin. Push against the non-slotted end.

Remove the firing pin and spring.

The firing pin should not be removed for general maintenance.

Removal of extractor;

Take out the extractor tool from the tool case.

Insert the tool into the slot in the extractor with the pointed end against the extractor pin (see picture

above).

Push the pin down and remove the extractor by tilting it down across the bolt face.

The extractor should only be removed if it (or the spring) needs replacing.