Installation Guide

Smart Garage Controller

3M Stickers

Screws

Line Holders

Ties

1.Power up the garage device,the red light and blue light flash alternatively.

2.Use the included Red & Black wire connect the device to your opener;Put each

end to the same terminals as the wall button wires are terminated to.

3.Use a tiny screw or nail to click the buto in the device,your garage door should

activate.

During pairing process,make sure that your IOS or Android device and the garage

are within the range of your WiFi router.

Power up the garage ,the red light and blue light flash alternatively.

"Wi-Fi Connector" type.

NOTICE:open/close alarm

Brackets

garage

Manufacturer Model

APC CB-SGX12

AHOUSE EM SWING GATE

AHOUSE RAM 100

ALLSTAR AC9000 Series

ALEKO 13XX

ALEKO 22XX

ALEKO AC1400

ALEKO AR1400

ALEKO AR900

ALEKO AS 1300

ALEKO  AS 450

ALEKO AS 650

ALEKO AS 900

ALEKO GateGuard 1300

ALEKO GateGuard 1700

ALEKO GateGuard 450

ALEKO GateGuard 650

ALEKO GateGuard 850

ALEKO GateGuard 900



Make Your Home Smarter