Instruction Manual

OPERATION INSTRUCTIONS
1. Place the appliance on a flat, stable, dry and heat- resistant surface.
2. Plug the electrical appliance connector / thermal controller into the appliance socket, then plug
the supply cord /plug into a mains supply socket outlet and switch on the socket.
Note: some initial force may be required to insert the appliance connector into the grill
socket, this is due to the length of the temperature probe, ensure fully inserted before
attempting operation.
3. Adjust the temperature dial on the electrical appliance connector/ thermal controller to your
desired setting (see thermostat control dial guide over page), the grill will start to heat.
4. For best results always pre-heat the grill for three to four minutes before use. The
appliance connector /thermal controller has an orange indicator light adjacent to the dial, the
light will illuminate when the element is on will switch off when the set temperature has been
reached. Note – the light will cycle on/off during operation, indicating that the set
temperature is being regulated.
5. Once the preheating period is complete and the grill has reached the desired temperature,
apply food and check regularly to see how the food is cooking and turn as required.
6. When the food is fully cooked remove it carefully from the grill using a spatula / tongs, ensure
the utensils are suitable for non-stick surfaces (ie wood or plastic – do not use metal utensils as
these may cause permanent damage to the non-stick surface coating).
7. Immediately after use unplug the grill and allow it to cool sufficiently before cleaning and
storage, always ensure that the drip tray is removed and cleaned.
GETTING STARTED
BEFORE FIRST USE
Carefully unpack and remove all packaging materials. We suggest you keep the original
packaging
carton and materials in a safe place, It will help prevent any damage if the product
needs to be transported in the future, and you can use it to store the appliance when it is not use.
In the event that the carton is to be disposed of, please recycle all packaging materials where
possible.
Dispose of any plastic wrapping safety as it
can be a suffocation hazard for babies and young
children. Before first use or after long periods of non-use wipe the non-stick cooking plates with a
damp cloth to ensure clean surfaces.
WARNING: DO
NOT IMMERSE THE UNIT AND DO NOT RUN WATER DIRECTLY ONTO
THE COOKING SURFACES. WHEN CLEANING THE GRILL, REMOVE THE ELECTRICAL
APPLIANCE CONNECTOR / THERMAL CONTROLLER FROM THE GRILL.
NOTE: W
hen your grill is heated for the first time, it may emit slight smoke or odour. This is
Normal with many heating appliances. This does not affect the safety of your appliance, it
should clear after several minutes of use.