Instruction Manual

CHARGING YOUR HAIR CLIPPER:
Before using your clipper, you will need to fully charge the internal battery.
 En
sure the product is switched off.
 Connect the charging adaptor lead to a USB outlet (5V with a supply
of at least 800mA), then connect the outlet lead to the product
connection socket. The charging
indicator will light up (red in colour) to
indicate charging has commenced.
The indicator will light up blue when
fully charged, the charge tim
e is
a
pproximately 1.5hrs.
 Your trimmer cannot be overcharged however, to ensure maximu
m
life span of the battery, it is recommended to disconnect from the
charging supply as soon as fully charge (blue light operates)
.
 If
the product is not going to be used for an extended period time (2-
3 months), unplug it from the mains and store. Fully recharge your
trimmer when you would like to use it again.
FITMENT OF BATTERY TO THE NOSE AND EAR HAIR
TRIMMER
 Th
e device requires 1 x AA (1.5V) battery (not included).
 Make sure the trimmer is in switched to the off position.
 Remove the battery access cover by rotating in a counterclockwis
e
d
irection.
 Insert 1 AA battery taking care to ensure correct polarity.
 Re-attach the battery access cover by rotating in a clockwis
e
orientation to lock into position.
2
13 0 0 886 649
A U