A/PB01A Rockchip RK3288 TM Elitegroup Computer Systems Co., LTD. No. 239, Sec. 2, Tiding Blvd.
Preface Copyri ght This publication, including all photographs, illustrations and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author. Version 1.0 Di scl ai mer The information in this document is subject to change without notice.
Federal Communi cati ons Commi ssi on (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Decl arati on of Conformi t y This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation.
Safet y Instructi ons Your system is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setti ng up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source such as a radiator. Set up the system on a stable surface.
• If you encounter the following technical problems with the product, unplug the power cord and contact a qualified service technician or your retailer. • The power cord or plug is damaged. • Liquid has been spilled into the system. • The system does not function properly even if you follow the operating instructions. • The system was dropped or the cabinet is damaged. • The system performance changes. The warranty does not apply to products that have been disassembled by users.
Product disposal notice IMPORTANT: This symbol if the crossed out wheeled bin indicates that the product (electrical and electronic equipment) should not be placed in municipal waste. Check local regulations for disposal of electronic products. Nordic Lithium Cautions (for lithium-ion batteries) CAUTION: Danger of explosoin if battery is incorrectly replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.
Canadi an Depar tment of Communi cati ons This class B digital apparatus meets all requirements of the Canadian Interference-causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Réglement sur le matériel brouilieur du Canada. Software Devel opment For Android app development details, please refer to the official Android developer web site http://developer.android.
Memo viii LIVA Q1A/ PB01A ULTRA TINY PC USER MANUAL
TABLE OF CONTENTS Preface i Chapter 1 1 Introducing the PC 1 Introduction....................................................1 Specifications..................................................2 Front and Rear I/O............................................4 Side I/O.............................................................6 Install the VESA Mount..................................7 Motherboard Components..............................
Memo x LIVA Q1A/ PB0 1A ULTRA TINY PC USER MANUAL
Introduction Chapter 1 Chapter 1 Introducing the PC Thank you for choosing LIVA Q1A/PB01A Ultra Tiny PC featuring Rockchip RK3288 of great performance and with stylish and flexible design. This mini PC is based on Rockchip RK3288 Mobile platform. Low power processor with ARM Quad-Cortex-A17 and integrates graphics, memory, and I/O interfaces into one solution. It supports LPDDR3 2GB memory, It also can add additional storage from USB Flash Drive and Micro SD.
Chapter 1 Note: ID design and specification may vary, please refer to actual goods you purchase. Specifications CPU/Chipset • Rockchip RK3288 Quad-core Cortex-A17 up tp 1.6GHz Memory • Onboard LPDDR3-1600 2GB Storage • Support eMMC 32 GB Panel I/O • • • • • • 3 x USB 2.0 ports 1 x Micro USB port 1 x Giga LAN connector 1 x HDMI 2.
802.11 b/g/n Wifi Bluetooth 5.2 supports BT peripheral device Power Supply • ASIAN POWER DEVICES INC. WB-24J12R Operation System • Android 8.1 / LINUX(Lubuntu 18.04) Heatsink Design • Heatsink Operation Temp • 0~+40OC Dimension Color • 74mm x 74mm x 34.
Front and Rear I/O Chapter 1 Note: ID design and specification may vary, please refer to actual goods you purchase. 4 1. Power Button Use this button to power on/off the system. 2. Power State LED This is power state LED light. 3. USB 2.0 Port Connect your USB 2.0 device to this port.
Chapter 1 4. HDMI Port You can connect the display device to the HDMI port. 5. Giga LAN Port Connect the RJ-45 jack to the LAN ports for Network connecting. 6. Micro USB Port Connect your Micro USB 2.0 device to this port. 7. 12V DC_IN Port Connect the DC_IN port to the power adapter.
Side I/O Chapter 1 6 8. Micro SD card slot This is Micro SD card slot. 9. Security Key hole This is security key hole.
1. Mount 4 screws on VESA bracket. Chapter 1 Install the VESA Mount 2. Fasten 2 screws under the case.
Chapter 1 3. Hold the case towards the VESA bracket and insert the screws into the holes. 4. Slide the case down until it fixed.
13 14 HDMI LAN 15 5 1 Micro USB 11 2 SW900 DC_IN SD Chapter 1 Motherboard Components SoC eMMC USB2.0 USB2.0 USB2.0 PWR_BTN LED 4 3 12 7 10 J1801 J1800 6 8 J1300 J1301 9 BAT Note: Find J1300~1301 and J1800~1801 on the two motherboards, insert J1300~1301 into J1800~1801 correctly after their alignment.
Table of Motherboard Components Chapter 1 LABEL COMPONENTS 1. SoC 2. SW900 3. LED 4. PWR_BTN 5. DC_IN 6. J1800 7. J1801 Rockchip® RK3288 Recovery button Power state LED Power On/Off button Power input port IO board connector IO board connector 8. J1301 Motherboard connector 9. BAT Battery connector 10. J1300 Motherboard connector 11. SD Micro SD card slot 12. USB2.0 Standard USB 2.0 port 13. HDMI HDMI connector 14. LAN Network connector 15. Micro USB Micro USB 2.
