Users Manual

TURN ON & TURN OFF
WHERE TO KEEP THE TAG
TAG VIBRATION: SOCIAL DISTANCING
TAG-TO-TAG INTERACTION (OPTIONAL)
TAG VIBRATION: COLLISION WARNING
SYSTEM (RTLS OPTIONAL)
When two tags come to a pre-defined
If tag-to-tag firmware is installed on the device the
following functinality will be available:
(recommended 6ft (2m)) proximity, they alert through
vibration.
Once one of the tags are out of range the alarm will stop.
TAG CHARGE
Please press the blue button for 2 seconds to turn on the
device. The LED will turn on and the device will vibrate.
Please press the blue button for 2 seconds to turn on the
device. The LED will turn off and the device will vibrate.
The tag can be carried on your
belt for best performance.
You may use the enclosed
clip to attach the device to
a lanyard.
If the collision warning system is installed, the tag
will be part of this system. The device will vibrate
when a forklift is in proximity for safety.
This will work only for standard configuration.
Consult your administrator if it does not work.
TAG VIBRATION: EMPLOYEE TRACKING
SYSTEM (RTLS OPTIONAL)
If the employee tracking system is installed, the tag
will be part of this system. Contact your administra-
tor to learn the details of how the system works.
If the asset tracking system is
installed, the tag will come
without the clip at the back.
Use double sided tape to secure
the device on assets.
Use a standard qi 10 W wireless charger. Put the device on
the charger with Litum logo facing up towards you.
Red LED will remain on until charge is complete and it will
turn off when the charge is complete or the device is off the
charger.
Prefer wall outlet versus USB plug for rapid charging.
If/when the battery is low, the system will be
notified so the device can be recharged.
Double
sided tape
TAG VIBRATION: ASSET TRACKING
SYSTEM (RTLS OPTIONAL)
9ft.
6ft.
3ft.