Operating Instructions

Plug in the anchor/ga
teway to a 110/220 V AC power outlet. When the
device is connected to a stable power supply, a green LED should start to
blink on the side of the device.
5
PLUG IN
The green LED will light up and remain steady when the device is communicating with a server.
Additional devices with RS232 or RS485
communications can be connected to the
device through the optional RJ11 port. Please
contact Litum for supported devices.
If the device is a gateway, server connection is possible through both ethernet and Wi-Fi. Network
settings will be done by Litum during installation.
OPERATION
4
www.litumiot.com | [e-mail]
RJ11 port