Operating Instructions

INSTALL SCREWS &
HANG THE DEVICE
4
3
CABLE CONNECTION
Secure the screws in place using the screwdriver.
Leave an adequate amount at the end of the
screw to allow the hanger on the
anchor/gateway to position securely on the wall.
Insert the power outlet into the plug at the
back of the anchor/gateway.
HOW TO MOUNT
2
DRILL &
INSERT WALL PLUGS
Drill the two holes on the template
and insert wall plugs.
37 mm (1.46 inc)
1
Print the anchor/gate
way drilling template.
Use it with bubble level and place it on the wall.
LOCATE & MARK
37 mm (1.46 inc)
3