Operating Instructions

Do you have all the tool
s needed?
M5 x 30 PANHEAD SCREWS x 2
1
7
mm
WALL ANCHOR x 2
2
Make sure that you have the correct type of anchors for the wall
that you’re mounting the device
(i.e: concrete, drywall)
Hammer
Dr
ill Screwdriver
PencilTape MeasureLaser M
eter
TemplateTapeBubble Level
INSTRUCTIONS
CAUTION
Anchor/Gateway is not suitable for
mounting on metal surfaces. Make sure
that it is mounted on a non-metal surface
such as concrete, plastic, drywall, etc.
All instructions here are for Litum Anchor/Gateway referred to as “anchor/gateway(s)” in the
document.
CAUTION
Anchor/Gateway have unique node IDs
that are printed on the back.
It is critical that this must be mounted with
the correct node ID at each location as
instructed by Litum application engineering team.
Designed and asse
mble
by Litum® in Turkey
Mode
l No. 110
Se
rial No. 10.100.
Node
ID. 63857
litum.com
1