Operating Instructions

4
www.litumiot.com | [e-mail]
OPERATION
When the device is connected to a stable power supply, service LED
should start to blink.
The service LED will light up and remain steady when the device is
communicating with a server.
RF Comm LED indicates RF communication is active.
The device has an internal backup battery. Turn the backup battery
switch o
n to ensure the device continues to work during power outage
or emergencies. To turn off the dev
ice completely, the backup battery
switch should be turned off.
Devices with RS232 or RS485 communications can be
connected to the device through the optional Aux Comm port.
Please co
ntact Litum for supported devices.
Digital input and relay output can be pushed through the optional
I/O port. For details please contact Litum.
In case of emergencies that can be triggered by the system, the
siren and the lights will provide alerts.
TCP LED will only be available if the device is a gateway and it will
be constantly on. Network settings for the gateways will be done
by Litum.
You can connect the anchor/
gateway to AC or DC power outlet as
shown here.
5B
PLUG IN
Battery Switch
AC 110/220V
DC 5V
DC 12-24V
AUX Port
Ethernet/PoE
I/O Port
TCP LED
Service LED
RF Comm LED
AC / DC Power
Make sure to use correct
power outlet for your device.
Failure to d
o so might result in explosion.