Installation Guide

ASSEMBLING INSTRUCTION
Desc
38420 - AMPYANG SIDE TABLE BUBUT KD
NAIL SCREW ( 12 pieces )
1. TEAK TRAY SLACE ( TOP )
2, TEAK LEG 3 PIECES ( BOTTOM )
1. Put the tray on the floor
2. Take and Put the leg to the
the tray slice and match with
the number
3, Match the insert to the insert
bolt hole
4. Lock the leg manualy w hand
rotate the right and unlock
the teak legs rotate to the left 1. after finish put the side table in the normal
position.
2. Put the side table in the flat media( floor )
to check balance and the strenght