Installation Guide

TOP AND 2 LEGS 6 BOLTS SPANNER
`
Assembly Instructions- 28745 MTL WD Bench
• You will find 2 metal legs having sticker
A/B ; and one main unit (top) with fixed
nuts on base. Each side of top has a unique
alphabet sticker corresponding to one on
each of the legs. •
• Turn the main unit upside down to
assemble the legs to the unit. Match the
alphabet assigned to the legs with the
alphabet assigned to the 2 sides on base.
• Place the iron leg against nuts of its
matching base and carefully insert the bolts
thru the holes. Then, tighten the bolts with
the help of SPANNER provided.
• Turn the unit correct way up.
• MTL WD Bench is now ready to
use.