User Manual

9
moduleType##-moduleName -v03( #_#x ).sch
| | | |
| | | ( #_#x ) =
| | | first digit: schematic revision number
| | | second digit: PCB revision number
| | | the “x” connotes that the design is in progress and
| | | has not been released for manufacturing.
| | v03 = the littleBits system is version 0.3
| moduleName = the name of the module
moduleType## = module type is one of the following: p (power), i
(input), o (output), or w (wire), followed by a one or 2-digit number.
Example: i21_MICROPHONE-v03(4_4x).sch
6.0.3 The moduleName and the number following moduleType will be
provided by LB.
6.0.4 The schematic should be based on one of the SCH templates
provided by LB, found in the HDK-eagle-templates-libraries
repository.
6.0.5 Schematic grid must be set to 0.1 inch.
6.0.6 The design must contain a FRAME-LETTER from the
LITTLEBITS140915.lbr library placed at position (0,0). This is
included in all the templates. All the other parts of the design
must be placed within the bounds of this frame.
6.0.7 All schematic symbols used must be from the
LITTLEBITS140915.lbr littleBits Eagle library. If specific device