User Manual

8
Standard and Custom Size References in Design/Eagle
Templates for SCH and BRD.
ELECT. REQUIREMENTS:
All requirements should remain as set in the template unless
there is a specific reason to change or add to them. Consult
with LB with any questions.
DESIGN REQUIREMENTS:
All requirements should remain as set in the template unless
there is a specific reason to change or add to them. The
requirement “Output bitSnap passes input signal through”
only applies for OUTPUT bits. If your bit is not an OUTPUT
bit, remove this requirement. Consult with LB with any
questions.
ACCESSORIES:
Any accessories that go with your bit, i.e. interface cable,
adapter, conductive ink, etc.
RELATED PRODUCTS: For internal LB use only.
LAYOUT PROPOSALS: For internal LB use only.
5.0.3 Save the PRD in the bit’s docs/prd directory with the format:
moduleType#-moduleName -PRD.xls
6.0.0 Schematic (SCH)
6.0.1 The schematic must be designed in EagleCAD version 6 or later.
6.0.2 File name must be in this format: