User Manual

14
performance in mind but with attention paid to maintaining
balance and symmetry between the X and Y-axis of the
PCB. See reference layouts in Appendix A.
7.1.8 Placing components over bottom layer silkscreen is
acceptable. Neat component placement takes priority. See
figures 1 and 2, and refer to section 7.3.0 for more
information on the silkscreen layers.
Figure 4: Example of neat component placement. Note how components are
placed in line with each other.
7.1.9 Components should be placed in 90 orientations and in
line with other components when possible.
7.1.10 Reference designators should be legibly placed around