Instructions

MEET THE ACCESSORY
a7 ADHESIVE SHOES
Shoes slip onto your Bit feet
and hold your circuit together.
On the bottom of your shoes
you'll nd adhesive, which
is great for securing your
circuits to dierent surfaces.
HOW IT WORKS
First, snap together your
littleBits circuit. Then press
the feet of your Bits into the
holes of the shoes and place
it on your chosen surface.
Adhesive shoes can be
secured onto any surface –
paper, cardboard, plastic
– you name it! Just peel the
adhesive backing o, and
stick it on.
Bit feet go in the shoes
NOTE: The shoe adhesive
is for one-time use only.
MEET THE ACCESSORY
HOW IT WORKS
a19 SERVO HUB
The servo hub lets you eas-
ily attach materials to your
servo motor and add more
complex movements to your
littleBits inventions.
The servo hub can be
attached and removed by
gently pushing or pulling it
on or o the servo motor.
This is helpful if you need to
reorient how the holes are
positioned for a project.
The servo hub can be
permanently attached by
using a small screw in the
center hole.
Use the included #6 screws
with any of these eight
outer holes.
USE A PHILLIPS-HEAD
SCREWDRIVER
BE SURE TO ALIGN THE
TEETH ON THE SHAFT
WITH THE TEETH IN THE
HUB HOLE