Guide

20
MEET THE ACCESSORY
HOW IT WORKS
a25 WHEEL
When used with a DC motor,
this wheel is perfect for mak-
ing bots, cars, and all sorts
of spinning inventions.
The metal shaft of the DC
motor and the hole in the
wheel are both flat edged.
To attach the wheel to the
DC motor shaft, align the
flat edge of the hole in the
wheel with the flat edge of
the motor shaft. Press rmly
to slide it on.
The wheel also connects
to the servo hub using the
included #6 screws.
LINE UP THE FLAT EDGE OF
THE DC MOTOR SHAFT WITH
THE FLAT EDGE OF THE CENTER
HOLE IN THE WHEEL
025 DC motor:
CW
DC motor:
Closeup
Use the included #6 screws in any
of the holes to permanently attach
to any surface.
a26 MOUNTING BOARD
MEET THE ACCESSORY
HOW IT WORKS
The mounting board is like
the backbone of some of
your inventions. It allows
you to keep your circuit
intact and move it around
with ease! It also provides
structure, which is helpful
for building out inventions
like a vehicle.
Snap together your littleBits
circuit and press the feet of
your Bits into the holes of the
mounting board.
NOTE: Your circuit must be
complete before you press
it onto the board. You won't
be able to add Bits one at
a time.
PRESS DOWN ON
BITSNAPS NOT
WHITE CIRCUIT
BOARD