Guide

18
MEET THE ACCESSORY
HOW IT WORKS
a19 SERVO HUB
The servo hub lets you eas-
ily attach materials to your
servo motor and add more
complex movements to your
littleBits inventions.
The servo hub can be
attached and removed by
gently pushing or pulling it
on or o the servo motor.
This is helpful if you need to
reorient how the holes are
positioned for a project.
The servo hub can be
permanently attached by
using a small screw in the
center hole.
Use the included #6 screws
with any of these eight
outer holes.
USE A PHILLIPS-HEAD
SCREWDRIVER
BE SURE TO ALIGN THE
TEETH ON THE SHAFT
WITH THE TEETH IN THE
HUB HOLE
MEET THE ACCESSORY
HOW IT WORKS
a22 BALL CASTER
The ball caster works as a
wheel, adding rolling support
to your inventions. The ball
can also be removed from
the socket, so you can use it
in games and contraptions.
You can even use the socket
as a ball stand!
Attach the ball caster to a
surface using small screws
(not included) or Glue Dots
®
.
Single screw hole