B349775339COM0
9775339COM 3 Drawer Dresser Keep this Assembly Manual for future reference. Two adults recommended for assembly Secure Your Furniture Las traducciones en español se encuentran al final de este manual. Vous trouverez les traductions en français à la fin de ce manuel. Keep your home and family safe with the wall anchor kit that is included with the product. For missing or broken parts - Visit littleseedskids.com - Call 1-800-489-3351 Serious or fatal crushing injuries can occur from tipping furniture.
Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST You Tube Visit littleseedskids.com to view the limited warranty valid in the U.S. and Canada.
Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification B A Top 37158339030 Left Panel D C Bottom 37158339040 Right Panel 39775339010 39775339020 G F E x3 Drawer Front Solid Back 37158339060 39775000050 DWR SIDE x6 Drawer Side 39991167346200C littleseedskids.
Board Identification This piece is paperboard construction. It is not made from wood but is required for the assembly of your unit. C B H E A D DWR SIDE DWR BACK G F DWR SIDE Drawer x3 littleseedskids.
Parts List Actual Size 1 3 2 x8 #A22620 cam lock 6 x4 #A23030 confirmat x8 #A22610 cam bolt x4 #A21660 wood dowel x12 #A21970 drive fastener 9 8 7 x38 #A12120 #8 x 7/16" screw 5 4 x6 #A13120 #8 x 1-3/8" screw x30 #A11080 #6 x 7/16" screw 10 x6 #A17400 #8 x 7/8" bolt x16 #A21110 nail Not Actual Size 11 x6 #A54520 drawer bracket littleseedskids.
Parts List 14 x3 #A56770 drawer slide package left cabinet member right cabinet member 14a left drawer member 14b 14c 14d 15 right drawer member x3 #A54900 metal drawer brace 16a 16c x4 16b 16 x1 #A95610 metal leg base kit littleseedskids.
Step 1 2 13a 13b x4 #A22610 x1 #A84050 2 Do not fully tighten screw 13b 13a C finished edge borde acabado bord fini 2 littleseedskids.
Step 2 1 1 x4 #A22620 1 E Quick Assembly Tip Proper orientation of CAM LOCK littleseedskids.
Step 3 7 14a x3 #A56770 x9 #A11080 Please Notice: You will use the smallest holes to attach the left cabinet member. A 7 finished edge 14a marked with a "L" littleseedskids.
Step 4 1 3 2 Quick Assembly Tip x2 #A22620 x2 #A22610 x2 #A21660 Proper orientation of CAM LOCK 2 A 3 littleseedskids.
Step 5 7 14b x3 #A56770 x9 #A11080 Please Notice: You will use the smallest holes to attach the right cabinet member. B 7 14b finished edge marked with a "R" littleseedskids.
Step 6 1 3 2 Quick Assembly Tip x2 #A22620 x2 #A22610 x2 #A21660 Proper orientation of CAM LOCK 2 B 1 littleseedskids.
Step 7 UNLOCK finished edge A E littleseedskids.
Step 8 finished edge B A E UNLOCK littleseedskids.
Step 9 4 x4 #A23030 finished edge A D B 4 littleseedskids.
Step 10 UNLOCK LOCK finished edge A C D B littleseedskids.
Step 11 10 6 x16 #A21110 x8 #A12120 2 people are required for this step. Carefully turn the unit over onto its front as shown. Assure that the unit is square. Distance from corner to corner must be equal as shown. Back panel notch location here. 10 H 6 E D Align the holes in the back panel (H) with the holes of the solid back (E). Using eight screws (6), screw the back panel onto the solid back. Do not fully tighten.
Step 12 16b 16a 16b 16a Assemble metal leg base kit (16) as shown. Slide side apron (16b) onto base (16a) and start each bolt (16c) a few turns so every bolt is started. Then tighten all the bolts. 16c 16c x4 16c 16c 16c littleseedskids.
Step 13 8 With help of another person, position your unit on its top as shown. Position the metal base as shown lining up the holes in the base with the pilot holes in the bottom (D). Start all six screws first with a couple of turns, then tighten all screws. x6 #A13120 8 16 D A B littleseedskids.
Step 14 6 11 x6 #A54520 x12 #A12120 DWR SIDE x3 DWR SIDE 11 11 x3 6 6 6 6 bracket orientation bracket orientation littleseedskids.
Step 15 6 x12 #A12120 6 6 DWR SIDE 6 F DWR SIDE x3 Be sure the groove in the drawer sides are centered in the drawer front (F) groove. littleseedskids.
Step 16 5 finished surface DWR SIDE x12 #A21970 G DWR SIDE 5 F x3 DWR BACK 5 G 5 F DWR SIDE You will need to tap the drive fasteners (5) lightly with a hammer to securely fasten. littleseedskids.
Step 17 7 9 x12 #A11080 12 14c left drawer member 14d right drawer member x3 #A52305 x3 #A56770 x6 #A17400 14d Attach the drawer members first, then the handle. 7 DWR SIDE DWR BACK 14c G 9 7 9 DWR SIDE x3 F 12 littleseedskids.
Step 18 6 x6 #A12120 15 x3 #A54900 Turn drawer upside down, and place drawer brace (15) with screws (6). F 6 15 DWR BACK G DWR SIDE 6 x3 littleseedskids.
Step 19 13c 13d x1 #A84050 For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING Serious or fatal crushing injuries can occur from furniture tipover.
Step 20 Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. cabinet member roller littleseedskids.
MAXIMUM LOADS This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 50 lbs 22.6 kg 35 lbs 15.8 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit littleseedskids.
Español Consejos Útiles (página 3) - Abra su artículo en el área donde usted planea utilizarlo para evitar levantar y moverlo menos - Identificar, ordenar y contar las piezas antes de intentar ensamblar - Las clavijas de compresión se golpean con un martillo - Las diapositivas están marcadas con una R (derecha) y L (izquierda) para la colocación correcta - Asegúrese de que siempre este el punto locaizado en la parte superior de bloqueador de leva este volteadohacia borde exterior - Utilizar todos los clavo
Español Página 19 2 personas se requieren para este paso. Cuidadosamente voltee la unidad sobre la parte de enfrente hacia abajo como se muestra. Asegurese que el unidad este cuadrada. La distancia de esquina a esquina debe ser igual como se muestra. Nuevo panel de ubicación muesca aquí. Alinee los orificios del panel posterior (H) con los orificios de la parte posterior sólida (E). Con ocho tornillos (6), atornille el panel posterior en la parte posterior sólida. No apriete completamente.
Español 13c Para mampostería, hormigón u otros materiales de la pared: Consulte a su ferretería local para los anclajes apropiados para fijar firmemente el soporte de seguridad. 13d x1 #A84050 IMPORTANTE: ESTA UNIDAD DEBE SER ASEGURADA CON LA PARED PARA PREVENIR VOLQUEO. SIGA ESTAS INSTRUCCIONES PARA INSTALAR EL SOPORTE DE SEGURIDAD ANTIVOLQUEO SUMINISTRADO CON ESTE PRODUCTO.
Español Página 28 Nota: Los agujeros de anclaje del cajón están asignados. El frente de los cajones se puede ajustar aflojando los tornillos, haciendo los ajustes necesarios y volviendo a apretar los tornillos. Página 29 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles.
Français Astuces Utiles (page 3) -Ouvrez votre article dans la zone que vous prévoyez de le garder pour moins de levage lourd -Identifier, trier et compter les pièces avant d'essayer d'assembler -Les goujons de compression sont taraudés avec un Marteau -Les glissières sont marquées d'un R (droit) et d'un L (gauche) pour un bon placement -Assurez-vous toujours de faire face la pointe situé sur le haut de la Serrure de Came vers le bord extérieur -Utiliser tous les clous fournis pour le panneau arrière et le
Français Page 19 2 personnes sont nécessaires pour cette étape. Tournez soigneusement le meuble sur le devant comme montré. Assurez-vous que le meuble est à égalité. La distance de coin en coin doit être égale comme montré. Emplacement de l'encoche du panneau arrière ici. Alignez les trous dans le panneau arrière (H) avec les trous du dos solide (E). À l'aide de huit vis (6), visser le panneau arrière sur le dos solide. Ne serrez pas complètement.
Français Pour la maçonnerie, béton ou d'autres matériaux de mur: 13c Consultez votre magasin local de matériel pour les ancrages 13d x1 appropriés pour fixer le support de #A84050 sécurité. IMPORTANT: CET APPAREIL DOIT ÊTRE FIXÉ AU MUR POUR AIDER À PRÉVENIR LE BASCULEMENT. SUIVRE CES INSTRUCTIONS POUR INSTALLER LE SUPPORT DE SÉCURITÉ ANTI-BASCULEMENT FOURNI AVEC CE PRODUIT. ATTENTION Blessures par écrasement graves ou mortelles peuvent se produire par le renversement des meubles.
Français Page 28 Remarque : Les trous du support de tiroir sont encastrés. Les faces avant du tiroir peuvent être ajustées en desserrant les vis, en effectuant les réglages nécessaires et en resserrant les vis. Page 29 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves.
