B341648339COM0
1648339COM Nightstand Keep this Assembly Manual for future reference. Two adults recommended for assembly Secure Your Furniture Las traducciones en español se encuentran al final de este manual. Vous trouverez les traductions en français à la fin de ce manuel. Keep your home and family safe with the wall anchor kit that is included with the product. For missing or broken parts - Visit littleseedskids.com - Call 1-800-489-3351 Serious or fatal crushing injuries can occur from tipping furniture.
Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Monday-Friday 9am - 5pm CST You Tube Visit littleseedskids.com to view the limited warranty valid in the U.S. and Canada.
Before You Start P P P P P Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight. Failure to do so may result in stripping the screw.
Board Identification A C B Top 31648339030 Left Panel 31648339010 Right Panel 31648339020 F E D Drawer Bottom Drawer Front 39991340041510D 31648339050 Bottom 31648339040 G DWR BACK DWR SIDE x2 Drawer Side Drawer Back 39991140040490B 39991140346200C littleseedskids.
Board Identification This piece is paperboard construction. It is not made from wood but is required for the assembly of your unit. C G B A D DWR SIDE DWR BACK F DWR SIDE littleseedskids.
Parts List 1 Actual Size 2 3 x4 #A23030 confirmat x4 #A22620 cam lock 6 x4 #A22610 cam bolt x4 #A21660 wood dowel x4 #A21970 drive fastener 9 8 7 x8 #A12120 #8 x 7/16" screw 5 4 x2 #A17400 #8 x 7/8" bolt x4 #A13120 #8 x 1-3/8" screw x10 #A11080 #6 x 7/16" screw 10 x22 #A21110 nail Not Actual Size 11 x2 #A54510 drawer bracket littleseedskids.
Parts List 14 x1 #A56770 drawer slide package left cabinet member right cabinet member 14a left drawer member 14b 14c 14d right drawer member 15a 15c x4 15b 15 x1 #A95600 metal leg base kit littleseedskids.
Step 1 13a 2 13b x4 #A22610 x1 #A84050 2 Do not fully tighten screw 13b 13a C 2 finished edge littleseedskids.
Step 2 7 14a x3 #A11080 x1 #A56770 3 1 x2 #A22620 x2 #A21660 1 A 7 3 finished edge 14a Quick Assembly Tip Marked with a "L" Marcado con un "L" Marqué par un "L". Proper orientation of CAM LOCK littleseedskids.
Step 3 7 14b x1 #A56770 x3 #A11080 3 1 x2 #A22620 x2 #A21660 Quick Assembly Tip Proper orientation of CAM LOCK 1 B finished edge 7 3 14b littleseedskids.com Marked with a "R" Marcado con un "R" Marqué par un "R".
Step 4 UNLOCK LOCK A finished edge B C littleseedskids.
Step 5 4 4 x4 #A23030 finished edge D A B C littleseedskids.
Step 6 15a 15b 15b 15a Assemble metal leg base kit (15) as shown. Slide side apron (15b) onto base (15a) and start each bolt (15c) a few turns so every bolt is started. Then tighten all the bolts. 15c 15c x4 15c 15c 15c littleseedskids.
Step 7 8 8 x4 #A13120 15 Position the metal base as shown lining up the holes in the base with the pilot holes in the bottom (D). Start all four screws first with a couple of turns, then tighten all screws. D A B C littleseedskids.
Step 8 Carefully turn the unit onto its front as shown. Assure that the unit is square. Distance from corner to corner must be equal as shown. 10 Back panel notch location here. x22 #A21110 10 G D A IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY. littleseedskids.com Align the bottom edge of the back panel with the lower edge of the bottom shelf (D). Align side edges with the edge of the left & right (A&B) and nail straight into back edges as shown.
Step 9 6 x2 #A54510 x4 #A12120 DWR SIDE DWR SIDE 11 11 6 6 6 6 bracket orientation littleseedskids.
Step 10 6 x4 #A12120 6 DWR SIDE DWR SIDE E Be sure the groove in the drawer sides are centered in the drawer front (E) groove. littleseedskids.
Step 11 5 finished surface F DWR SIDE x4 #A21970 DWR SIDE 5 E DWR BACK DWR SIDE 5 5 You will need to tap the drive fastners (5) lightly with a hammer to securely fasten. littleseedskids.
Step 12 9 7 12 14c x4 #A11080 14d x2 #A17400 14d Attach the drawer members first, then the handle. 7 DWR BACK DWR SIDE 14c F 7 DWR SIDE 9 9 E 12 littleseedskids.
Step 13 13c x1 #A84050 13d For Masonry, Concrete, or other wall materials: Consult your local hardware store for appropriate anchors to securely attach the safety bracket. IMPORTANT: THIS UNIT MUST BE SECURE TO THE WALL TO HELP PREVENT TIPOVER. FOLLOW THESE INSTRUCTIONS TO INSTALL THE ANTI-TIPPING SAFETY BRACKET PROVIDED WITH THIS PRODUCT. WARNING hole Serious or fatal crushing injuries can occur from furniture tipover.
Step 14 Notice, the drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. cabinet member roller littleseedskids.
MAXIMUM LOADS This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 40 lbs 18.2 kg 15 lbs 6.1 kg 40 lbs 18.2 kg Warning: Risk of injury to persons - do not place a television on this furniture. This furniture is not approved for use with a television. Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
Register your product to receive the following: * New trend details - sneak peek on what's new * Surveys - have a voice within our community * Exclusive deals and discount codes * Quick and easy replacement part service To register your product, visit littleseedskids.
Español Consejos Útiles (página 3) - Abra su artículo en el área donde usted planea utilizarlo para evitar levantar y moverlo menos - Identificar, ordenar y contar las piezas antes de intentar ensamblar - Las clavijas de compresión se golpean con un martillo - Las diapositivas están marcadas con una R (derecha) y L (izquierda) para la colocación correcta - Asegúrese de que siempre este el punto locaizado en la parte superior de bloqueador de leva este volteadohacia borde exterior - Utilizar todos los clavo
Español Página 16 Cuidadosamente voltee la unidad sobre la parte de enfrente hacia abajo como se muestra. Asegurese que el unidad este cuadrada. La distancia de esquina a esquina debe ser igual como se muestra. Nuevo panel de ubicaciſn muesca aquş. Alinee el borde deabajo del panel de atras con el borde deabajo del panel inferior (D). Alinee los ejes laterales con el borde de los paneles izquierdo y derecho (A y B) y clava directamente en los bordes traseros como se muestra.
Español Página 23 CARGA MAXIMA Esta unidad ha sido diseñada para soportar la carga máxima anotada. El exceder estos límites puede causar inestabilidad, colapsarse y/o causar serias lesiones. ADVERTENCIA: Riesgo de lesiones a las personas - no coloque un televisor sobre muebles. Este mueble no está aprobado para su uso con un televisor.
Español x1 #A84050 Para mampostería, hormigón u otros materiales de la pared: Consulte a su ferretería local para los anclajes apropiados para fijar firmemente el soporte de seguridad. IMPORTANTE: ESTA UNIDAD DEBE SER ASEGURADA CON LA PARED PARA PREVENIR VOLQUEO. SIGA ESTAS INSTRUCCIONES PARA INSTALAR EL SOPORTE DE SEGURIDAD ANTIVOLQUEO SUMINISTRADO CON ESTE PRODUCTO.
Français Astuces Utiles (page 3) -Ouvrez votre article dans la zone que vous prévoyez de le garder pour moins de levage lourd -Identifier, trier et compter les pièces avant d'essayer d'assembler -Les goujons de compression sont taraudés avec un Marteau -Les glissières sont marquées d'un R (droit) et d'un L (gauche) pour un bon placement -Assurez-vous toujours de faire face la pointe situé sur le haut de la Serrure de Came vers le bord extérieur -Utiliser tous les clous fournis pour le panneau arrière et le
Français Page 16 Tournez soigneusement le meuble sur le devant comme montré. Assurez-vous que le meuble est à égalité. La distance de coin en coin doit être égale comme montré. Emplacement de l'encoche du panneau arrière ici. Alignez le bord inférieur du panneau arrière avec le bord inférieur de l'étagère inférieure (D). Alignez les parties latérales avec le bord des panneaux gauche et droit (A et B) et clouez directement dans les bords arrière comme indiqué.
Français Page 23 CHARGES MAXIMALES Ce meuble a été conçu pour supporter les charges maximales indiquées. En excédant ces limites de charge, le meuble pourrait devenir instable, s'effondrer, et/ou causer des blessures graves. AVERTISSEMENT : Risque de blessure corporelle - ne pas placer une télévision sur ce meuble. Ce meuble n'est pas approuvé pour une utilisation avec une télévision.
Français Pour la maçonnerie, béton ou d'autres matériaux de mur: Consultez votre magasin local de x1 #A84050 matériel pour les ancrages appropriés pour fixer le support de sécurité. IMPORTANT: CET APPAREIL DOIT ÊTRE FIXÉ AU MUR POUR AIDER À PRÉVENIR LE BASCULEMENT. SUIVRE CES INSTRUCTIONS POUR INSTALLER LE SUPPORT DE SÉCURITÉ ANTI-BASCULEMENT FOURNI AVEC CE PRODUIT. ATTENTION Blessures par écrasement graves ou mortelles peuvent se produire par le renversement des meubles.
