Overview of Primary Product

Little

Pump Company

GIANT

Features

Thermally Protected, Totally Enclosed, Fan

Cooled, Capacitor Start Motor

Ball Bearings

Conduit Box (must be field wired —

cord not included)

Specific Gravity to 1.1

Fluid Temperature to 200 Degrees F.

Ambient Air Temperature to 77 Degrees F.

NOTE: Consult your local distributor or the

factory for applications with higher ambient

temperatures, specific gravities and viscosities.

Volute — Carbon-filled Kynar

Backplate — Carbon-filled Kynar

Impeller — Carbon-filled Kynar w/Carbon-

filled Teflon (Chemloy) Bushing

Shaft — Ceramic (Silicon Carbide on 587639)

Thrust Washers — Ceramic (Silicon Carbide on

587639)

O-Ring — Viton (Teflon on 587639)

The Little Giant MD-CK series features leakproof, seal-less magnetic drives and are designed for in-line, non-

submersible use. Volute, magnet housing and impeller are carbon-filled Kynar for excellent chemical

resistance. Ceramic shaft and thrust washers are 99.5% pure alumina (except 587639 which are Silicon

Carbide). Pumping heads are easily rotated, cleaned or serviced. Spindle shaft is supported at both ends to

prevent impeller damage during start-up and stop of pump.

TE-7-MD-CK

Construction

Magnetic Drive

PAGE 1
Little GIANT Magnetic Drive Pump Company TE-7-MD-CK Features + Thermally Protected, Totally Enclosed, Fan Cooled, Capacitor Start Motor + Ball Bearings + Conduit Box (must be field wired — cord not included) + Specific Gravity to 1.1 + Fluid Temperature to 200 Degrees F. + Ambient Air Temperature to 77 Degrees F. + NOTE: Consult your local distributor or the factory for applications with higher ambient temperatures, specific gravities and viscosities.
PAGE 2
TE-7-MD-CK Specifications NOTE: Designs and dimensions may vary for various reasons (i.e. type of motor). This information should be used as general guide rather than an unqualified guarantee. Specifications are subject to change without prior notice. Model No. Item No.