Brochure
MD Series Pumps
5
Applications Applications
FeaturesFeatures
Model Characteristics
Series Specifications Series Specifications
Model Characteristics
Performance Curves 1-AA-MD 230V, 50/60Hz Performance Curves 1-MD 230V, 50/60Hz
230 volt, 50Hz 230 volt, 60Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
0 3 6 9 12 15
0
2
4
6
8
10
0 1 2 3
1-AA-MD
SERIES
1/200 HP
Non-Submersible, In-line Use
RPM: 2900/3000
Capacity: 9 LPM
Shut Off: 1.3 m
Liquid Temperature: 66°C
Discharge: 1/2" OD (12.7 mm)
Intake: 1/2" OD (12.7 mm)
Impeller: Glass- lled polypropylene
& Ceramagnet “A” (Barium
Ferrite)
Electrical: 230V, 50/60Hz
• Impeller magnet is uncoated,
permanent high quality ceramic/
barium ferrite
• Most models have a titanium
shaft and thrust washer for
excellent wear and corrosion
resistance
• 1/200 HP open motor
• Glass- lled polypropylene
magnet housing and volute
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• PTFE thrust washers
• Stainless steel shaft
Item # Model Volts Hertz Amps Watts Lead Wires List/Cert.
588002 1-AA-MD 230 50/60 0.14 15
0.9 m
(witho plug)
cCSAus
• Circulation of mildly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other mildly corrosive chemicals and
solutions that are compatible with the pump's material of construction
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
230 volt, 50Hz 230 volt, 60Hz
0.0
0.5
1.0
1.5
2.0
0 3 6 9 12
0
2
4
6
0 1 2 3
1-MD SERIES
1/70 HP
Non-Submersible, In-line Use
RPM: 2700/3000
Capacity: 13.2 LPM
Shut Off: 2.3 m
Liquid Temperature: 66°C
Discharge: 1/2" OD (12.7 mm)
Intake: 1/2" OD (12.7 mm)
Impeller: Glass- lled polypropylene
& Ceramagnet “A” (Barium
Ferrite)
Electrical: 230V, 50/60Hz
• Impeller magnet is uncoated,
permanent high quality ceramic/
barium ferrite
• Most models have a titanium
shaft and thrust washer for
excellent wear and corrosion
resistance
• 1/70 HP open FC motor
• Glass- lled polypropylene
magnet housing and volute
• 1.1 speci c gravity
• Nitrile O-ring
• Titanium thrust washers
and shaft
• Circulation of mildly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other mildly corrosive chemicals and
solutions that are compatible with the pump's material of construction
Item # Model Volts Hertz Amps Watts Cord List/Cert.
589012 1-MD 230 50/60 0.66 90
1.8 m
(witho plug)
–