Brochure

21
Accessories
Material = Polypropylene Temp. Rating = 65˚C.
This adapter allows the use of  exible tubing to be easily connected to the pump inlets with no restriction of  ow.
Tubing Adapters for Inlets of MD Pumps
Item No. Description Pump Inlet Size
599454 1-1/2" MNPT x 3.81 cm OD Barb 1 1/2" FNPT
Magnetic Drive Pumps
Accessories
O-Rings
Item No. Type Size Uses
924023
PTFE Encapsulated
Fluoroelastomer (FKM)
2-040
(7.275 cm ID x 0.178 cm)
Replaces standard O-ring in MD, MD-SC and MD-HC
#1 through #5 series pumps.
924008 Fluoroelastomer (FKM)
2-040
(7.275 cm ID x 0.178 cm)
Standard on MD-HC, #2 through #5 series pumps.
Can be used on MD and SC #1 through #5 series.
924019 PTFE
2-243
(10.437 cm ID x 0.353 cm)
Replaces standard O-ring in TE-5.5, TE-6;
and 7-MD, SC and HC pumps.
Example: The diameter of a TE-4-MD-HC impeller is 6.35 cm. To use this pump with a liquid having a 1.4 density, multiply the impeller’s original diameter by .89 to calculate the needed trimmed size
(6.35 cm X .89 = 5.66 cm).
Theoretical Impeller Diameter Change for Liquids Heavier Than Water
Liquid density (speci c weight) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0
Multiply original diameter by: 1.0 0.97 0.94 0.91 0.89 0.87 0.85 0.83 0.82 0.81 0.79