Brochure
MD Series PumpsTE-MD-CK Series Pumps
19
Applications Applications
FeaturesFeatures
Performance Curves Performance Curves
Model Characteristics Model Characteristics
Series Specifications
Performance Curves TE-5.5-MD-CK 230V, 50/60Hz
Performance Curves TE-6-MD-CK 230V, 50/60Hz
TE-5.5-MD-CK SERIES
1/3 HP
Non-Submersible, In-line Use
RPM: 2850/3450
Capacity: 102 LPM
Shut Off: 8.8 m
Liquid Temperature: 93.3°C
Discharge: 3/4" MNPT (19 mm)
Intake: 1" FNPT (25.4 mm)
Impeller: Carbon- lled PVDF with
mica- lled PTFE bushing*
Electrical: 230V, 50/60Hz
• Volute, magnet housing and im-
peller are carbon- lled PVDF for
excellent chemical resistance
• Mica- lled PTFE bushing is
long-lived in abrasive solutions
• Encapsulated carbon- lled
PVDF permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for
excellent wear and trouble-free
service with harsh solutions
• 1/3 HP TEFC split phase motor
• Carbon- lled PVDF volute and
backplate
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
TE-6-MD-CK SERIES
1/2 HP
Non-Submersible, In-line Use
RPM: 2850/3450
Capacity: 125 LPM
Shut Off: 10.4 m
Liquid Temperature: 93.3°C
Discharge: 3/4" MNPT (19 mm)
Intake: 1" FNPT (25.4 mm)
Impeller: Carbon- lled PVDF
bushing (586600);
Mica- lled PTFE bushing
(586610)
Electrical: 230V, 50/60Hz
• Volute, magnet housing and im-
peller are carbon- lled PVDF for
excellent chemical resistance
• Self-lubricating carbon- lled
PTFE impeller bushing is
impervious to uids and long-
lived in abrasive solutions
• Encapsulated carbon- lled
PVDF permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for
excellent wear and trouble-free
service with harsh solutions
• 1/2 HP TEFC split phase motor
• Carbon- lled PVDF volute and
backplate
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
230 volt, 50Hz 230 volt, 60Hz230 volt, 50Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
4
8
12
16
0 30 60 90 120 150
0
10
20
30
40
50
0 10 20 30
Item # Model Volts Hertz Amps Watts Cord List/Cert.
585600 TE-5.5-MD-CK 230 50/60 2.8 340
Not
included
cCSAus
Item # Model Volts Hertz Amps Watts Cord List/Cert.
586600 TE-6-MD-CK 230 50/60 5.8 640
Not
included
C-cCSAus
586610 TE-6-MD-CK 230 50/60 5.8 640
Not
included
C-cCSAus
230 volt, 50Hz 230 volt, 60Hz230 volt, 50Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
3
6
9
12
15
0 30 60 90 120 150
0
10
20
30
40
0 10 20 30
Series Specifications