Brochure
MD Series PumpsMD-HC Series Pumps
18
Applications Applications
FeaturesFeatures
Model Characteristics Model Characteristics
Series SpecificationsSeries Specifications
Performance Curves TE-6-MD-HC 230V, 50/60Hz Performance Curves TE-7-MD-HC 230V or 460V, 50/60Hz
TE-6-MD-HC SERIES
1/2 HP
Non-Submersible, In-line Use
RPM: 2850/3450
Capacity: 125 LPM
Shut Off: 10.7 m
Liquid Temperature: 82.2°C
Discharge: 3/4" MNPT (19 mm)
Intake: 1" FNPT (25.4 mm)
Impeller: Glass- lled polyphenylene
sul de with carbon
bushing
Electrical: 230V, 50/60Hz
• Run dry capability for up to eight
hours without apparent damage
• Volute, magnet housing and
impeller are glass- lled PPS for
excellent chemical resistance
• Self-lubricating carbon impeller
bushing is impervious to uids and
long-lived in abrasive solutions
• Encapsulated glass- lled PPS
permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for excel-
lent wear and trouble-free service
with harsh solutions
• 1/2 HP TEFC split phase motor
• Glass- lled polyphenylene sul de
volute and backplate
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
NOTE: Although no pump should be operated dry, the TE-6-MD-HC model with carbon bushing and
ceramic shaft has a run-dry capability of up to eight hours without damage.
230 volt, 50Hz 230 volt, 60Hz230 volt, 50Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
4
8
12
16
0 30 60 90 120 150
0
10
20
30
40
50
0 10 20 30
TE-7-MD-HC SERIES
3/4 HP
Non-Submersible, In-line Use
RPM: 2850/3450
Capacity: 159 LPM
Shut Off: 12.3 m
Liquid Temperature: 93.3°C
Discharge: 1" MNPT (25.4 mm)
• Run dry capability for up to eight
hours without apparent damage
• Volute, magnet housing and
impeller are glass- lled PPS for
excellent chemical resistance
• Self-lubricating carbon impeller
bushing is impervious to uids and
long-lived in abrasive solutions
• Encapsulated glass- lled PPS
permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for excel-
lent wear and trouble-free service
with harsh solutions
• 3/4 HP TEFC PSC motor
• Glass- lled polyphenylene sul de
volute and backplate
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
NOTE: Although no pump should be operated dry, the TE-7-MD-HC models with carbon bushing and
ceramic shaft have a run-dry capability of up to eight hours without damage.
230 or 460 volt, 50Hz 230 or 460 volt, 60Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
5
10
15
20
0 50 100 150 200 250
0
15
30
45
60
0 15 30 45 60
Item # Model Volts Hertz Amps Watts Cord List/Cert.
586604 TE-6-MD-HC 230 50/60 5.8 640
Not
included
cCSAus
586638 TE-6-MD-HC 230 50/60 5.8 640
Not
included
CE
Item # Model Volts Hertz Amps Watts Cord List/Cert.
587010 TE-7-MD-HC 230 50/60 5.2 700
Not
included
cCSAus
587039 TE-7-MD-HC 230 50/60 5.2 700
Not
included
CE
587040 TE-7-MD-HC 230/460
50/60
3 phase
3.0/1.5 700/680
Not
included
cCSAus
Intake: 1-1/2" FNPT (38 mm)
Impeller: Glass- lled polyphenylene
sul de with carbon bushing
Electrical: 230V, 50/60Hz
230V, 50/60Hz CE
230/460V, 50/60Hz (3 phase)