Brochure
MD Series PumpsMD-HC Series Pumps
17
Applications Applications
FeaturesFeatures
Model Characteristics
Series Specifications Series Specifications
Model Characteristics
Performance Curves TE-5-MD-HC 230V, 50/60Hz Performance Curves TE-5.5-MD-HC 230V, 50/60Hz
TE-5-MD-HC SERIES
1/8 HP
Non-Submersible, In-line Use
RPM: 2850/3450
Capacity: 61 LPM
Shut Off: 6.2 m
Liquid Temperature: 93.3°C
Discharge: 1/2" MNPT (12.7 mm)
Intake: 1" FNPT (25.4 mm)
Impeller: Glass- lled polyphenylene
sul de with carbon
bushing
Electrical: 230V, 50/60Hz
• Run dry capability for up to eight
hours without apparent damage
• Volute, magnet housing and
impeller are glass- lled PPS for
excellent chemical resistance
• Self-lubricating carbon impeller
bushing is impervious to uids and
long-lived in abrasive solutions
• Encapsulated glass- lled PPS
permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for
excellent wear and trouble-free
service with harsh solutions
• 1/8 HP TEFC PSC motor
• Glass- lled polyphenylene sul de
magnet housing and volute
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
NOTE: Although no pump should be operated dry, the TE-5-MD-HC model with carbon bushing and
ceramic shaft has a run-dry capability of up to eight hours without damage.
230 volt, 50Hz 230 volt, 60Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
2
4
6
8
10
0 20 40 60 80
0
6
12
18
24
30
0 5 10 15 20
Item # Model Volts Hertz Amps Watts Cord List/Cert.
584604 TE-5-MD-HC 230 50/60 1.3 220
1.8 m
(3-prong plug)
Cord not installed
C-cCSAus
584638 TE-5-MD-HC 230 50/60 1.3 220
1.8 m
(3-prong plug)
Cord not installed
CE
TE-5.5-MD-HC SERIES
1/3 HP
Non-Submersible, In-line Use
RPM: 2850/3450
Capacity: 102 LPM
Shut Off: 8.8 m
Liquid Temperature: 82.2°C
Discharge: 3/4" MNPT (19 mm)
Intake: 1" FNPT (25.4 mm)
Impeller: Glass- lled polyphenylene
sul de with carbon
bushing
Electrical: 230V, 50/60Hz
• Run dry capability for up to eight
hours without apparent damage
• Volute, magnet housing and
impeller are glass- lled PPS for
excellent chemical resistance
• Self-lubricating carbon impeller
bushing is impervious to uids and
long-lived in abrasive solutions
• Encapsulated glass- lled PPS
permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for excel-
lent wear and trouble-free service
with harsh solutions
• 1/3 HP TEFC motor
• Glass- lled polyphenylene sul de
volute and backplate
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
NOTE: Although no pump should be operated dry, the TE-5.5-MD-HC model with carbon bushing
and ceramic shaft has a run-dry capability of up to eight hours without damage.
230 volt, 50Hz 230 volt, 60Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
3
6
9
12
15
0 30 60 90 120 150
0
10
20
30
40
0 10 20 30
Item # Model Volts Hertz Amps Watts Cord List/Cert.
585604 TE-5.5-MD-HC 230 50/60 2.8 340
Not
included
cCSAus