Brochure
MD Series PumpsMD-HC Series Pumps
16
Applications Applications
FeaturesFeatures
Performance Curves Performance Curves
Series Specifications
Model Characteristics Model Characteristics
Series Specifications
Performance Curves TE-4-MD-HC 230V, 50/60Hz Performance Curves 5-MD-HC 230V, 50/60Hz
TE-4-MD-HC SERIES
1/10 HP
Non-Submersible, In-line Use
RPM: 2750/3000
Capacity: 49 LPM
Shut Off: 4.9 m
Liquid Temperature: 93.3°C
Discharge: 1/2" MNPT (12.7 mm)
Intake: 1/2" FNPT (12.7 mm)
Impeller: Glass- lled polyphenylene
sul de with carbon
bushing
Electrical: 230V, 50/60Hz
• Run dry capability for up to eight
hours without apparent damage
• Volute, magnet housing and
impeller are glass- lled PPS for
excellent chemical resistance
• Self-lubricating carbon impeller
bushing is impervious to uids
and long-lived in abrasive
solutions
• Encapsulated glass- lled PPS
permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for
excellent wear and trouble-free
service with harsh solutions
• 1/10 HP open TEFC PSC motor
• Glass- lled polyphenylene sul de
magnet housing and volute
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
NOTE: Although no pump should be operated dry, the TE-4-MD-HC models with carbon bushing and
ceramic shaft have a run-dry capability of up to eight hours without damage.
230 volt, 50Hz 230 volt, 60Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
2
4
6
8
0 15 30 45 60
0
5
10
15
20
25
0 3 6 9 12 15
5-MD-HC SERIES
1/8 HP
Non-Submersible, In-line Use
RPM: 2500/3000
Capacity: 60 LPM
Shut Off: 5.9 m
Liquid Temperature: 93.3°C
Discharge: 1/2" MNPT (12.7 mm)
Intake: 1" FNPT (25.4 mm)
Impeller: Glass- lled polyphenylene
sul de with carbon
bushing
Electrical: 230V, 50/60Hz
• Run dry capability for up to eight
hours without apparent damage
• Volute, magnet housing and
impeller are glass- lled PPS for
excellent chemical resistance
• Self-lubricating carbon impeller
bushing is impervious to uids
and long-lived in abrasive
solutions
• Encapsulated glass- lled PPS
permanent impeller magnet
• Ceramic shaft and thrust wash-
ers are 99.5% pure alumina for
excellent wear and trouble-free
service with harsh solutions
• 1/8 HP open FC PSC motor
• Glass- lled polyphenylene sul de
magnet housing and volute
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
NOTE: Although no pump should be operated dry, the 5-MD-HC models with carbon bushing and
ceramic shaft have a run-dry capability of up to eight hours without damage.
Item # Model Volts Hertz Amps Watts Cord List/Cert.
582614 TE-4-MD-HC 230 50/60 0.50 120
1.8 m
(witho plug)
C-cCSAus
582638 TE-4-MD-HC 230 50/60 0.50 120
1.8 m
(witho plug)
CE
Item # Model Volts Hertz Amps Watts Cord List/Cert.
583613 5-MD-HC 230 50/60 0.9 194
1.8 m
(witho plug)
C-cCSAus
230 volt, 50Hz 230 volt, 60Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
2
4
6
8
10
0 20 40 60 80
0
6
12
18
24
30
0 5 10 15 20