Brochure
MD Series PumpsMD-HC Series Pumps
15
Applications Applications
FeaturesFeatures
Performance Curves Performance Curves
Model Characteristics
Series Specifications Series Specifications
Model Characteristics
Performance Curves 2-MD-HC 230V, 50/60Hz Performance Curves TE-3-MD-HC 230V, 50/60Hz
2-MD-HC SERIES
1/30 HP
Non-Submersible, In-line Use
RPM: 2700/3000
Capacity: 28 LPM
Shut Off: 3.2 m
Liquid Temperature: 93.3°C
Discharge: 1/2" MNPT (12.7 mm)
Intake: 1/2" FNPT (12.7 mm)
Impeller: Glass- lled polyphenylene
sul de with carbon
bushing
Electrical: 230V, 50/60Hz
• Run dry capability for up to eight
hours without apparent damage
• Volute, magnet housing and
impeller are glass- lled PPS for
excellent chemical resistance
• Self-lubricating carbon impeller
bushing is impervious to uids
and long-lived in abrasive
solutions
• Encapsulated glass- lled PPS
permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for
excellent wear and trouble-free
service with harsh solutions
• 1/30 HP open FC motor
• Glass- lled polyphenylene sul de
magnet housing and volute
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
NOTE: Although no pump should be operated dry, the 2-MD-HC models with carbon bushing and
ceramic shaft have a run-dry capability of up to eight hours without damage.
230 volt, 50Hz 230 volt, 60Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
5
0
1
2
3
4
0 10 20 30 40
0
4
8
12
16
0 2 4 6 8 10
TE-3-MD-HC SERIES
1/20 HP
Non-Submersible, In-line Use
RPM: 2750/3200
Capacity: 35 LPM
Shut Off: 3.5 m
Liquid Temperature: 93.3°C
Discharge: 1/2" MNPT (12.7 mm)
Intake: 1/2" FNPT (12.7 mm)
Impeller: Glass- lled polyphenylene
sul de with carbon
bushing
Electrical: 230V, 50/60Hz
• Run dry capability for up to eight
hours without apparent damage
• Volute, magnet housing and
impeller are glass- lled PPS for
excellent chemical resistance
• Self-lubricating carbon impeller
bushing is impervious to uids
and long-lived in abrasive
solutions
• Encapsulated glass- lled PPS
permanent impeller magnet
• Ceramic shaft and thrust washers
are 99.5% pure alumina for
excellent wear and trouble-free
service with harsh solutions
• 1/20 HP TEFC motor
• Glass- lled polyphenylene sul de
magnet housing and volute
• 1.1 speci c gravity
• Fluoroelastomer (FKM) O-ring
• Circulation of highly corrosive acids, alkalis, solvents, brine, plating
solutions, sterile solutions, and other highly corrosive chemicals and
solutions that are compatible with the pump's material of construction
NOTE: Although no pump should be operated dry, the TE-3-MD-HC models with carbon bushing and
ceramic shaft have a run-dry capability of up to eight hours without damage.
230 volt, 50Hz 230 volt, 60Hz
Total Head in Meters
Capacity - Liters per Minute
Capacity - Gallons per Minute
Total Head in Feet
0
1
2
3
4
5
6
0 10 20 30 40
0
3
6
9
12
15
18
0 2 4 6 8 10
Item # Model Volts Hertz Amps Watts Cord List/Cert.
580613 2-MD-HC 230 50/60 0.65 105
1.8 m
(witho plug)
C-cCSAus
580614 2-MD-HC 230 50/60 0.65 105
1.8 m
(witho plug)
CE
Item # Model Volts Hertz Amps Watts Cord List/Cert.
581614 TE-3-MD-HC 230 50/60 1.10 135
1.8 m
(witho plug)
C-cCSAus
581638 TE-3-MD-HC 230 50/60 0.89 120
1.8 m
(witho plug)
CE